Sunday 21 April 2013

Removing The Scratches From The Sandstone Tiles


You have to wear rubber gloves before starting the work. Mix the oxygen bleach powder with warm water and dissolve them completely. Dip the plastic scrubbing brush into the solution and work on the area where there are scratches. This will eliminate the germs from the marks and use a cloth dipped with fresh water to remove the solutions. Again, you must use a dry cloth to clean the sandstone tiles.


Dip the steel wool in cold water and rub on the scratches to remove them completely from the surface. Use a low grade of steel wool, as heavy grade will damage the surface. If the scratches are deeper, then opt for a professional to remove them. You have to apply sandstone sealant after removing the scratches and allow them to dry. You can apply a second coat of sealant to protect the surface.

3 comments:

  1. sandstone tiles
    At Gaiastone we take great pride on the values we bring into work; we are passionate about natural stone, and we are also passionate about our environment. In fact, our name, Gaiastone, means Stone from the Earth.
    Contact Us
    Phone: 1300 240 022
    http://www.gaiastone.com.au/

    ReplyDelete
  2. It would be easier to understand if the instruction were numbered or bullet list to have a possible checklist for the task. But I would really keep this in mind before I go and buy myself floor tiles fitting for my taste.

    ReplyDelete
  3. Thank you because you have been willing to share information with us. we will always appreciate all you have done here because I know you are very concerned with our. Floor Tiles Suppliers

    ReplyDelete